Juniper QFX Series QFX5100-48T – switch – 48 ports – managed – rack-mountable


Get Juniper QFX Series QFX5100-48T – Switch at the best market-competitive price with ready to ship availability.

Condition: Refurbished

Device Type: Switch – 48 ports – L3 – managed

In Stock – Ready to Ship.

$2,950.00

Miscellaneous
Compliant StandardsNEBS level 3, EN55022 Class A, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, WEEE, RoHS, BSMI CNS 13438, REACH, EN 60825-1, GR-1089-CORE, VCCI Class A, GR-63-CORE, NCC, China RoHS, AS/NZS CISPR 22, CAN/CSA-C22.2 No. 60950-1
Dimensions & Weight
Width17.4 in
Depth21.5 in
Height1.7 in
Weight24.69 lbs
Environmental Parameters
Min Operating Temperature32 ?F
Max Operating Temperature104 ?F
Humidity Range Operating5 – 90% (non-condensing)
Min Storage Temperature-40 ?F
Max Storage Temperature158 ?F
Humidity Range Storage0 – 95% (non-condensing)
General
Device TypeSwitch – 48 ports – L3 – managed
Enclosure TypeBack to front airflow rack-mountable 1U
Subtype10 Gigabit Ethernet
Ports48 x 100/1000/10000 + 6 x 40 Gigabit QSFP+ (breakout compatible)
PerformanceSwitching capacity: 1.44 Tbps ? Switching capacity: 1.08 Bpps
CapacityIPv4 routes (Unicast): 128000 ? Virtual interfaces (VLANs): 4091 ? IPv4 hosts: 208000 ? IPv4 routes (Multicast): 104000 ? IPv6 routes (Multicast): 52000 ? IPv6 routes (Unicast): 64000 ? ARP entries: 48000 ? Multiple Spanning Tree Protocol instances: 64 ? VLAN Spanning Tree Protocol instances: 253
MAC Address Table Size288K entries
Jumbo Frame Support9216 bytes
Fibre ChannelFC-BB-5, FC-BB-6
Routing ProtocolOSPF, RIP, RIP-2, IGMPv2, IGMP, VRRP, PIM-SM, static IP routing, IGMPv3, MSDP, ECMP, Bidirectional Forwarding Detection (BFD), CIDR
Remote Management ProtocolSNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH, CLI
Encryption AlgorithmMD5, AES
Authentication MethodSecure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2)
FeaturesFlow control, VPN support, BOOTP support, RARP support, ARP support, trunking, VLAN support, IGMP snooping, DoS attack prevention, store and forward, MAC address filtering, IPv6 support, High Availability, SNTP support, Low-latency queuing (LLQ), Weighted Random Early Detection (WRED), sFlow, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, tunneling, Data Center Bridging Exchange (DCBX) support, DHCP snooping, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, Dynamic ARP Inspection (DAI), Redundant trunk group (RTG), Non-Stop Bridging (NSB), Non-Stop Routing (NSR), Graceful Route Engine Switchover (GRES), IPv4 support, DHCP relay, Data Center Bridging (DCB), Management Information Base (MIB), Strict Priority Queuing (SPQ), VLAN Spanning Tree Protocol (VSTP), loop prevention, redundant hot swappable fans, FCoE forwarding, Class of Service (CoS), cut-through, 12 MB shared buffer
Compliant StandardsIEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1s, IEEE 802.1ad, IEEE 802.1ab (LLDP), IEEE 802.1Qbb, IEEE 802.1Qaz, IEEE 802.1Qau, IEEE 802.1Qbg, Shaped Deficit Weighted Round-Robin (SDWRR)
Processor1 x Intel: 1.5 GHz
RAM8 GB
Built-in Devices32 GB SSD
Expansion / Connectivity
Interfaces48 x 10GBase-T RJ-45 ? 6 x QSFP+ (breakout compatible) ? 1 x console management ? 1 x USB management ? 1 x RJ-45 management ? 1 x SFP management
Power
Power DeviceInternal power supply – hot-plug
Installed Qty2 (installed) / 2 (max)
Power RedundancyYes
Power Redundancy Scheme1+1
Voltage RequiredAC 120/230 V
Power Consumption Operational335 Watt
80 PLUS Certification80 PLUS
Software / System Requirements
OS RequiredJUNOS
SKU: QFX5100-48T-AFI Category: Tags: ,

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Juniper QFX Series QFX5100-48T – switch – 48 ports – managed – rack-mountable”

There are no reviews yet.